Thermic Fluid Heater

With our inventory management system, we are capable to undertake urgent and massive requirements of the buyers at a time. As we ensure complete safety of the products at our end, we follow stringent and organized warehousing system in our state-of-the-art warehouse. Moreover, the system is supervised by experts.

Specifications :

• Design, Erection & Commissioning of TFH using briquette as fuel replacing LDO, HSD and F.O etc is done by us
• Thermic fluid which acts as a heat carrier is heated up in the coil and circulated through the user equipment
• Arrangement of furnace on that radiation & convective coil are mounted so that heat transfer takes place from flue gas to oil, ultimately oil reaches to 250 to 280 Deg. C to provide required energy to client’s application
• Gas purification unit i.e. Cyclone or Ventury scrubber is mounted between W.P.H and I.D. fan, this adjustment is done if required according to PCB norms

Note : Change in temperature can be done according to the client’s requirement (i.e.Kcal )

Advantage Of TFH :

• Closed system cycle operation with minimum losses as compared to steam boilers
• High steam pressure can be replaced by TFH because boiler system becomes bulky at high steam pressure
• Non pressurizing system, operation even for temperature around 250 to 280 deg C can be achieved